contact angle research to real world series lab test adjuvant education

Share This Article

Facebook
Twitter
LinkedIn

What Contact Angle Reveals About Wetting Agents & Surfactants

Chris Walter, Chemist
Chris Walter, Chemist

Adding surfactants or other adjuvants can increase the effectiveness of pesticides by positively affecting deposition, spreading, sticking or penetrating into the plant. Understanding the properties of adjuvants by measuring the contact angle of an adjuvant creates insight into the performance of adjuvants. Contact angle is a measurement taken in the lab that reveals a solution’s ability to spread out on and wet a surface.

Contact angle measures the angle of a liquid droplet when it is placed on a solid surface, emulating how a product will spread out on a leaf. The lower the contact angle, the more the adjuvant spreads out, the better wetting abilities it has. This measurement helps compare how well products can wet a surface.

Measuring Contact Angle Using Static Sessile Drop Method

1. A surfactant or adjuvant solution is prepared, loaded into a syringe, and placed into a contact angle goniometer.
2. The surface is prepared on the goniometer test platform. This can be glass, metal, quartz, or any other material so long as it is uniform and replicable.

In the Exacto lab, small pieces of Parafilm are used as our standard surface. This allows for a consistent surface that is both replicable as well as disposable to avoid contamination between tests. Parafilm is also an industry-accepted model for a waxy leaf surface, which makes the test more applicable to the real-world usage of Exacto formulations in agriculture, turf and ornamental or industrial vegetation management.

3. A single drop of the test solution is deposited onto the surface and lit with a backlight to cast a silhouette onto the observation screen.
4. The droplet is allowed to rest while the test platform is adjusted to bring the silhouette into focus on the observation screen. The wait gives the tester time to adjust the platform while also allowing the drop to spread slightly and reach an equilibrium state between surface tension and gravity.
5. Once the drop is rested, the contact angle is measured using the observation screen.

Why Measure Contact Angle?

When an agricultural spray is applied to a plant, the droplets deposit onto the leaf surface. These droplets will either bead up or spread out. This is based on factors like temperature, how waxy the leaf is, how rough the leaf is, and the chemicals in the spray mixture. If a drop beads up, it is more likely to roll off the leaf surface together with the active. If a drop spreads out, it is more likely to stay attached to the leaf surface and keep the agricultural chemical on the plant. When a drop of liquid is put on a solid surface, there are three boundaries to consider – liquid – air, air – solid, solid – liquid. Contact angle is measured where these surfaces meet.

low contact angle shows good wetting, high contact angle shows excellent wetting, high contact angle shows poor wetting

Contact angle measures where gas phase, liquid, and solid meet when a droplet is placed on a surface. A lower contact angle spreads the active over a larger surface.

What Contact Angle Reveals About an Adjuvant’s Wetting Ability

When a droplet stretches out on a leaf, it increases the surface area it covers. The contact angle measures a liquid’s ability to stretch out over a leaf. A lower contact angle predicts more spread-out droplets, leading to better wetting capabilities.

A droplet that beads up on a surface has a very high contact angle. A droplet that spreads out across a surface has a low contact angle.

What Makes Adjuvants Key in Applications

Water on Parafilm has a contact angle of roughly 93-95 degrees, which is high. Adding a surfactant or wetting agent can reduce the contact angle significantly depending on the type of surfactant and concentration. This also reduces the chance of droplets beading up and bouncing off the plants during an application.

Contact angle measures where gas phase, liquid, and solid meet when a droplet is placed on a surface. 

While any liquid with a contact angle smaller than 90 degrees indicates a wetting capability, the lower the contact angle, the better the spreading is. Liquids with a zero-degree contact angle wet a surface completely and contact angles between 10 and 20 degrees are considered excellent wetters. 

The Value of Measuring Contact Angle

Contact angle is a very valuable measurement for comparing adjuvant properties. This test, combined with other useful tests like surface tension and Draves Test, provides concrete data on fundamental aspects of a solution. While they do not always correlate to a solution’s ability to wet a surface, they can provide insight to the characteristics of a formulation. Wetting of solid surfaces is a complicated process that depends on a multitude of other factors, and contact angle is a handy way to measure how adjuvants can help an active cover the target area more effectively.

draves test for wetting agents and surfactants

What Draves Test Reveals About Wetting Agents & Surfactants

Understanding formulations starts in the lab. Knowing how a substance might perform under certain conditions can help users understand how the products they use may act and perform in the real-world. Exacto Chemist, Chris Walter, explains the Draves Test to help applicators better understand the chemistry behind surfactants and wetting agents in this edition of the Research to Real-World series.

Read More »
New CCO Malin Westfall

Exacto Announces Malin Westfall as Chief Commercial Officer

Exacto is pleased to announce the appointment of Malin Westfall as Chief Commercial Officer. Westfall’s appointment reflects Exacto’s commitment to driving commercial excellence as the company seeks to expand its market presence and advance its mission of improving resource efficiency in soil and water.

Exacto Announces David Hollinrake as Chief Executive Officer

Exacto is excited to announce the hire of David Hollinrake as CEO. David brings over three decades of experience in the agricultural industry, including leadership roles at Syngenta, Bayer, Monsanto, and Adayana. David’s leadership at Exacto will continue our commitment to helping growers improve resource efficiency.

cutting-edge perspective PJ Liesch the wisconsin bug guy director of university of Wisconsin Madison Insect Diagnostic Lab

Cutting-Edge Perspective: PJ Liesch, The Wisconsin Bug Guy

The Wisconsin Bug Guy, PJ Liesch, shares stories of scorpions, emerald ash borers, mosquitos, and other insects in this Cutting-Edge Perspective. As the UW Madison Insect Diagnostic Lab Director, PJ uses his expertise to identify unknown insects to point people in the right direction for pest management.

Exactos USDA Certified Biobased Products are COMPLETION, AUDIBLE 90, and MOTION

Complete Your Product Line with USDA Certified Biobased Adjuvants

An increased use of biobased products reduces our nation’s reliance on petroleum, increases the use of renewable agricultural resources, and contributes to reducing adverse environmental and health impacts. Exacto’s USDA Certified Biobased Products are ready to boost your product line. 

agricultural spray drone insecticide fungicide

Keys to Success for Insecticide & Fungicide Applications in 2024

Crop dusters and spray drones are taking flight, but is what’s in the tank enough to take on this year’s disease pressure? A strong fungicide or insecticide application can make or break a successful cropping season, but the optimum tank mix is incomplete without the right adjuvants.

Follow Exacto, Inc.

Featured Products